|
Fuji Industrial Spray Equipment 9001-5 Aircap Set #5 for XT Spraygun
|
MSRP: $69.95
Your Price: $57.95
Savings: $ 12.00 ( 17% )
Shipping: N/A
Manufacturer: Fuji Industrial Spray Equipment
Prices subject to change. Please verify price during checkout.
|
|
Fuji Industrial Spray Equipment 9001-5 Aircap Set #5 for XT Spraygun Features
|
Air cap set for spray gun ideal for faster and wetter coverage
Perfect for painting large surfaces with latex and paints
0.070-inch nozzle size for high output atomization
Complete needle, nozzle, and jet kit; needle and nozzle made of stainless steel
For use with XT spray gun
|
|
|
|
|
|
Additional Fuji Industrial Spray Equipment 9001-5 Aircap Set #5 for XT Spraygun Information
|
The Fuji industrial spray equipment air cap set #5 is ideal for faster and wetter coverage using your spray gun; it has a wide range of applications and is perfect for painting large surfaces with latex and paints. This air cap set is intended for use with the XT spray gun and does not fit older Fuji spray gun models. This air cap set is a complete needle, nozzle, and jet kit with a larger 0.070-inch nozzle size for high output atomization, allowing you to cover surfaces quickly. The needle and nozzle are made of durable stainless steel. For a proper fit, the fluid nozzle and needle must match exactly, but the air cap set may be one size up or down from the norm and still be compatible. With the larger air cap set sizes, some slight texture in the finish may occur.
|
|
|
What Customers Say About Fuji Industrial Spray Equipment 9001-5 Aircap Set #5 for XT Spraygun:
|
|
If you open the air up - it will deposit a lot of material. Customers like the "rich and deep" finishes this gun produces. If you are looking for a fine controlled spray pattern (I like a 3" dia. But, if you are serious about spraying a lot of latex you should probably be using an airless sprayer. I have the #3, #4 and #5 tips.
If you really want to move a lot of material for an HVLP unit, this nozzle will give you that ability. I keep this nozzle on most of the time and use it to spray lacquers, oil-based paints, metallic paints and varnishes. Keep the gun moving. The #5 is good for just about everything I do. "Flotrol" and plenty of coats will give you a latex finish that looks like an oil-based spray.
This is good for the occasional latex job. round pattern for my furniture) this nozzle can give it to you.
Set trigger and air control wide open and did ok with un-thinned primer and the gloss paint. Did very well. Used it with the Q4 system spraying Kiltz 2 primer and Dunn-Edwards gloss. Thinned the primer 10%, cut the air and trigger down.
|
|
 |
|
|
